FAQ’s

Door Hardware:

A round hole made using a drill, commonly used in reference to tubular door lock preparations.

The backset is the distance from the edge of the door to the center of the 2-1/8" bore hole. In the U.S. there are two common backsets for residential locks, 2-3/8" and 2-3/4". We will pack your locks with a 2-3/8" or 2-3/4" latch depending on which backset you specify.

A fixed pull attached either directly to a door or with a backplate.

The dimensions that a door must be bored or mortised in order for a handle set to be installed.

A deadbolt featuring a key way on the exterior as well as a key way on the interior.

Dummy sets have no latch and require no bore hole. They are surface mounted to the door so you can install a dummy set wherever you choose. They can be secured to the rosette and to the door with a supplied Allen wrench.

A lockset using a keypad input and a user code to engage or disengage the latch bolt.

An entry set with a plate that spans the entire length, from the deadbolt to the bottom of the handle grip.

Levers and some handle grips are either Right handed or Left handed depending on the orientation in which the door opens and the side the hinges are located.

A knob or lever that includes a keyed cylinder that locks from the face of the hardware set instead of requiring a separate deadbolt and bore hole in the door. Often used in place of an entry set for secure entrance to the home or for a back door entrance.

An entry set with a plate that spans from the top of the deadbolt to the top of the handle grip.

A lockset that fits in a mortised door, featuring a rectangular hole that a mortise lock body slides into.

Door locks that offer multiple latching points with one locking mechanism.

A handle set without an internal locking mechanism. A passage set is used on a door that doesn't require privacy, for example; between a living room and a kitchen or closet.

A spring loaded mechanism that slides it's bolt into a strike plate on a door jamb, securing the door shut and disengages when the attached knob or lever is turned.

A spring loaded mechanism that slides it's bolt into a strike plate on a door jamb, securing the door shut and disengages when the attached knob or lever is turned.

A pin that engages the privacy feature on the latch from the interior side of the rosette. Can be disengaged in an emergency by inserting a narrow object (like the end of a paperclip) into the emergency release hole on the exterior rosette.

A decorative trim plate that goes between the knob/lever/handle and door, used in both door and cabinet hardware.

An entry set with separate plates for the deadbolt and handle grip.

A deadbolt featuring a key way on the exterior and thumb turn on the interior.

A hinge that has a built in spring that can facilitate the self closing of a door when it is not propped open.

The flat stub located above the handle on an entry set that disengages the latch bolt.

The turn piece located on the inside trim of a deadbolt that engages/disengages the latch mechanism.

A lockset requiring bored (round) holes rather than a chiseled rectangular mortise door preparation.

Steel that is worked to resemble the rustic hand craftsmanship of wrought iron, which is not commonly produced any more.

Alder

Alder is primarily used for interior doors and is one of the more affordable wood species available. Although it has a prominent wood grain, its light color makes it a strong candidate for various stains.

Ash

Ash is extremely versatile, as it can be used for both interior and exterior doors. It is not only durable but also very inexpensive, sharing a similar grain to that of mahogany at a fraction of the cost.

Birch

Birch is best reserved for interior doors, as it is not very weather resistant. Similar to maple, it has a golden color and very mild wood grain. Because it is often knotty, it doesn’t always accept wood stains or paint well.

Cedar

Cedar is a popular option for exterior doors, as it is highly weather resistant and moderately priced. This wood species is very durable and requires little maintenance.

Cherry

Cherry is a hardwood that is beloved for its beautiful reddish wood tones and relatively fine grain. Its rich color can be preserved with a light stain.

Hickory

Hickory is one of the strongest and densest wood species on the market, making it a great option for both exterior and interior doors. Its medium brown color can be left unfinished or paired with a light wood stain.

Mahogany

Mahogany is one of the most recognizable hardwoods, thanks to its dark brown hue and tight wood grain. Although more expensive than many other species, mahogany is both durable and versatile.

Maple

Maple is used for both interior and exterior custom wood doors, thanks to its incredible hardness and shock-resistant qualities. Similar to birch, it has a light golden color and tight wood grain.

Oak

Oak is a sturdy hardwood that is used for both exterior and certain interior doors. While there are various species of oak, red and white and the most popular options.

Pine

Pine is used almost exclusively for interior doors, as it is not the most weather-resistant wood species. It is, however, both durable and relatively affordable.

Poplar

Poplar is another affordable option for interior doors. Like alder, it has a light color that allows it to pair well with wood stains and paints. Its wood grain, however, is more
obscure than most.

Walnut

Walnut is one of the best wood types of custom interior doors, as it has a very distinct dark brown color that pairs well with a light stain.

Most interior panel doors measure 80 inches high. They come in various widths, however, ranging from 24 inches to 36 inches.

Panel doors are more decorative than flush doors in that they use multiple pieces of wood for ornamentation. A flush door, on the other hand, is constructed from a single piece of solid wood.

There are many different types of panel doors, but the most popular options include single, double, three-panel, four-panel, and six-panel doors.

Most interior panel doors measure 1-3/8 inches thick, but larger doors may need to measure upwards of 1-3/4 inches thick in order to adhere to building codes.

Interior panel doors are simple and durable enough to require minimal maintenance, yet decorative enough to add character to any room in your home.